The Yokosuka MXY7 Ohka was used mostly against U.S. ships invading Okinawa, and if launched from its mothership, could be effective because of its high speed in the dive. It was carried to within twenty miles of its target by […] Also on this sprue are the skid supports for both the fuselage and the loop supports on the outer lower wings.Brengun provides decals, a small sheet with only two Hinomaru for the fuselage and a data stencil for the rear of the aircraft, which appear to be in good register and not too thick. The MXY-7 Navy Suicide Attacker Ohka was a manned flying bomb that was usually carried underneath a Mitsubishi G4M2e "Betty" Model 24J bomber to within range of its target; on release, the pilot would first glide towards the target and when close enough he would fire the Ohka's three solid-fuel rockets, one at a time or in unison,and fly the missile towards the ship that he intended to destroy.
The parts have quite reasonable detail but, as is often found with limited run kits, has some small flash to clean up before construction and some quite large sprue gates which will take some cleaning up. I also appreciate the folks behind the scenes in the Review Corps who keep the review machine running so well, and finally my most sincere appreciation to all who take the time to read this.The content of this field is kept private and will not be shown publicly.This question is for testing whether you are a human visitor and to prevent automated spam submissions.
Price: 14.90€ plus shipping available online from Brengun
The Yokosuka MXY-7 Ohka “cherry blossom” was a purpose-built, rocket-powered human-guided kamikaze attack aircraft employed by Japan against Allied ships towards the end of World War II.The Ohka Model 22 suicide attacker, powered by a Ishikawajima Tsu-11 thermo-jet engine with reduced span wings and 600 kg (1,300 lb) warhead, to be carried by Yokosuka P1Y1 Ginga bombers.
YOKOSUKA MXY7 OKHA MODEL 43 K-1 KAI The Okha (Cherry Blossom) is a winged human-guided anti-ship bomb developed by the Japanese Navy in 1944 for attacks against Allied warships. Contents & Media. plastic injection kit of japanese training plane
There are colour call outs for interior details etc, but the list is just a list of colours, not linked to any paint manufacturer at all. Allied forces recovered the Ohka Kai in Japan in 1945. The fuselage halves and wings have no locators, but they fit together without issue after a quick pass on a sanding stick. Kugisho engineers developed an improved trainer, the two-seat MXY7 K-2 Ohka 43B, when they substituted a second cockpit for the warhead/ballast compartment. Many pilots were killed in learning to fly these aircraft.Brengun have given us another interesting subject, especially for those modelling Japanese WWII aircraft. Yokosuka Ohka MXY7-K1 KAI (two seats) Catalog number: BRP48005. On release, the pilot would first glide towards the target and when close enough he would fire the Ohka's three solid-fuel rockets, one at a time or in unison,and fly the missile towards the ship that he intended to destroy.
The relatively small parts count makes this a quick build, but some experience with small photoetched parts will be beneficial. The MXY-7 Navy Suicide Attacker Ohka was a manned flying bomb that was usually carried underneath a Mitsubishi G4M2e Model 24J "Betty" bomber to within range of its target.
By war's end, some 5,000 pilots died making Tokko attacks.The Ohka (Cherry Blossom) Model 22 was designed to allow a pilot with minimal training to drop from a Japanese navy bomber and guide his aircraft with its warhead at high speed into an Allied warship.
Brengun have released a neat injected moulded version in their less numerous 1/48 range.I do have one query of Brengun in that, with my interest in Japanese aircraft, my research has shown that the only 2 seat trainers were powered versions and referenced as the K2 versions. While I had the Pitot tube set aside for installation after painting the body, I managed to knock an item into the clip holding it, which launched the pitot somewhere, maybe in the house, but I am not certain, so I used a small piece of stainless steel tubing as a replacement.I used Tamiya Cockpit Green, JN Gray, and Dark Green 2 for the majority of the painting while the seats and control panel gauges received Badger Stynylrez Black, and the rear wheel was painted with Vallejo Dark Rubber.
Yokosuka Ohka MXY7-K1 KAI Brengun.
BRP48005 Yokosuka Ohka MXY7-K1 KAI (two seats) Scale: 1/48. I also like to thank John Noack and Phil Peterson for their time and efforts in running the Review Corps as well as allowing me to perform this assessment.
The decals look good and they settled easily with Micro Set and Micro Sol. Two grey injected moulded sprues (48 parts), a clear sprue (2 parts), 1 resin part, decals and A5 folded instructions.
There is some flash to deal with and larger sprue gates to clean up.Brengun continue to give us more options in 1/48 scale and this Ohka 2 seat Trainer is a good option that fills a hole in the 48th scale Japanese subjects.
I would recommend this to the Japanese air modeller and to anyone wanting a quick, fairly simple build kit.Brengun Kit No.
Sprue A, with 32 parts on it, has the fuselage halves, rocket engine parts, seats and instrument panels as well as the parts for the twin tail for the aircraft. The operational version of the weapon contained a 2,600 pound bomb and a single pilot. 50 built by the First Naval Air Technical Arsenal were never used.
Most of the openings for the small parts (control sticks, landing skid supports, and Pitot tube) were undersized requiring a small drill bit to open them up a little. The front page of the instructions shows the part locations, which is important as the sprues do not have numbers on them. Brengun Kit No. The Japanese used the word Tokko-tai (Special Attack) to describe these units.
The resin replacement tail pieces mimic the ones used on the trainer and the photoetched parts are a great addition to add realism to the wings. Newsfeed. Yokosuka Ohka MXY7-K1 KAI two seats (Brengun kit) Number: BRL48128: Scale: 1:48 : Type: Detail set: Released: 2019 | Initial release - new tool: Barcode: 4589913289239 (EAN) Topic: Yokosuka MXY7 Ohka » … The Yokosuka MXY7 Ohka-page contains all related products, articles, books, walkarounds and plastic scale modeling projects dedicated to this aircraft.